When it comes to car cleaning, most people would agree that pressure washing is the best way to clean car engine. But some people argue that it is not advisable because it can cause damage to the engine. On the other hand, some others argue that the best pressure washing service is harmless and safe. So, what to believe in?

Unfortunately, there is no right answer for this question. It depends on several things. For example, in some cases pressure washing can be used safely while in others it can cause certain kind of damage.

In fact, each method has its own pros and cons. Therefore, you should know both sides of the story before deciding whether or not you should use pressure washing for car cleaning.

Well, there are actually a few good reasons not to pressure wash an engine, but most have to do with the type of cleaner you use. If you use a cleaner that contains degreasers and/or detergents that can be harmful to the seals in your engine and vehicle, then yes — you should avoid pressure washing your engine bay altogether.

Factors to Consider When Pressure Washing Car Engine

Car engines get extremely dirty, especially if you don’t open the hood very often. However, it’s important to clean them on a regular basis so that they work properly. Not only that, but cleaning your car engine can make it look nicer as well.

It can be hard to clean your car engine sometimes, though. That’s why it is best to use a pressure washer to do the job. If you use one of these on your car engine, then you’ll likely be able to get the dirt and grime off easily.

  • Water Pressure:

The pressure of water is measured in PSI (pounds per square inch) or BAR (units of atmospheric pressure). It’s important for you to know the appropriate amount of water pressure for each part of your vehicle. For example, if you’re cleaning a car engine, the water pressure should be between 2000PSI – 3000PSI. Air intake on cars can be quite sensitive at times so make sure you use a lower water pressure when cleaning it.

  • Flow Rate:

Flow rate is measured in litres/minute or gallons/minute. A fast flow rate indicates that the pump is working harder, causing more wear and tear on it. The higher the flow rate, the faster and more powerful the jet will be. You should always choose an appropriate flow rate depending on what kind of surface you’re going to clean.

  • Engine compartment layout:

Engines vary greatly among different makes and models, so it’s important to consult a professional or review your vehicle’s owner manual to determine where the hoses and wires are located when pressure washing car engines.

  • Pressure washer type:

There are many types of pressure washers, so ensure that you have one that will work effectively with your car’s engine type. Remember that you only need a 1500 psi pressure washer for this task, not a heavy duty one.

  • The Location of the Car

Consider where you’ll be pressure washing your vehicle. Will you be doing the work on your own driveway, or will you take it somewhere? If you want to do the work at home, make sure you have a hose long enough to reach all areas of your vehicle from one location. Otherwise, plan to move the vehicle as needed so that all sides can be sprayed.

Get the best pressure washers today and forget risking your car by cleaning from unskilled servicemen. Visit Giraffetools collections today and get your best budget machine.

Previous articleHow to Store A Short Bob Wig
Next articleHow To Install A Loose Deep Wave Wig
Jamie was born in the countryside and has always lived with a more carefree attitude. She loves spending time outdoors, whether that means going for walks, playing sports, or simply soaking up the sun. Jamie is also an animal lover and has a special place in her heart for dogs - she's even been known to rescue them from bad situations! She works as a veterinarian and is always looking to help others, whether it be animals or people.

LEAVE A REPLY

Please enter your comment!
Please enter your name here